The bracket positions illustrated are for a blind with the control chain on the right hand side of the blind. For a blind with the control chain on the left, the brackets should be at the opposite ends. Check that the rolled up fabric will not touch any surface. To calculate the spacing between the brackets, add 35mm ( I 3/a”) to the width of the blind fabric. Fix the brackets so that the outsides of the brackets are this distance apart.
Before fixing the brackets, first measure the distance between the outside edges of the brackets by placing the complete blind in the brackets (see fitting diagrams below) and holding it tight in position. Add 2mm to this dimension to allow play for ease of operation.
Mark the position of the first bracket, then measure the distance referred to above (including the 2mm tolerance) to give the position of the second bracket. Fix the brackets as indicated above.
